1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44

[    8.576881] saa7164 driver loaded
[    8.576907] saa7164 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    8.577068] CORE saa7164[0]: subsystem: 0070:8980, board: Hauppauge WinTV-HVR2200 [card=4,insmod option]
[    8.577073] saa7164[0]/0: found at 0000:08:00.0, rev: 129, irq: 17, latency: 0, mmio: 0xfb800000
[    8.577078] saa7164 0000:08:00.0: setting latency timer to 64
[    8.577082] IRQ 17/saa7164[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[    8.776223] saa7164_downloadfirmware() no first image
[    8.776277] saa7164_downloadfirmware() Waiting for firmware upload (v4l-saa7164-1.0.3.fw)
[    8.776280] saa7164 0000:08:00.0: firmware: requesting v4l-saa7164-1.0.3.fw
[    8.823802] saa7164_downloadfirmware() firmware read 3978608 bytes.
[    8.823804] saa7164_downloadfirmware() firmware loaded.
[    8.823810] saa7164_downloadfirmware() SecBootLoader.FileSize = 3978608
[    8.823816] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
[    8.823817] saa7164_downloadfirmware() BSLSize = 0x0
[    8.823818] saa7164_downloadfirmware() Reserved = 0x0
[    8.823819] saa7164_downloadfirmware() Version = 0x51cc1
[   16.043162] saa7164_downloadimage() Image downloaded, booting...
[   16.162352] saa7164_downloadimage() Image booted successfully.
[   18.537735] saa7164_downloadimage() Image downloaded, booting...
[   19.864202] saa7164_downloadimage() Image booted successfully.
[   19.915183] saa7164[0]: Hauppauge eeprom: model=89619
[   20.411669] DVB: registering new adapter (saa7164)
[   23.543767] DVB: registering new adapter (saa7164)
[   23.544036] saa7164 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   23.544039] saa7164[1]: Your board isn't known (yet) to the driver.
[   23.544039] saa7164[1]: Try to pick one of the existing card configs via
[   23.544040] saa7164[1]: card=<n> insmod option.  Updating to the latest
[   23.544041] saa7164[1]: version might help as well.
[   23.544042] saa7164[1]: Here are valid choices for the card=<n> insmod option:
[   23.544044] saa7164[1]:    card=0 -> Unknown
[   23.544045] saa7164[1]:    card=1 -> Generic Rev2
[   23.544046] saa7164[1]:    card=2 -> Generic Rev3
[   23.544047] saa7164[1]:    card=3 -> Hauppauge WinTV-HVR2250
[   23.544048] saa7164[1]:    card=4 -> Hauppauge WinTV-HVR2200
[   23.544049] saa7164[1]:    card=5 -> Hauppauge WinTV-HVR2200
[   23.544050] saa7164[1]:    card=6 -> Hauppauge WinTV-HVR2200
[   23.544051] saa7164[1]:    card=7 -> Hauppauge WinTV-HVR2250
[   23.544053] saa7164[1]:    card=8 -> Hauppauge WinTV-HVR2250
[   23.544324] CORE saa7164[1]: subsystem: 0070:8940, board: Unknown [card=0,autodetected]
[   23.544329] saa7164[1]/0: found at 0000:06:00.0, rev: 129, irq: 19, latency: 0, mmio: 0xfb000000
[   23.544334] saa7164 0000:06:00.0: setting latency timer to 64
[   23.544337] IRQ 19/saa7164[1]: IRQF_DISABLED is not guaranteed on shared IRQs
[   23.544344] saa7164_initdev() Unsupported board detected, registering without firmware
[   23.822598] saa7164 0000:08:00.0: firmware: requesting dvb-fe-tda10048-1.0.fw